|
Home | About Us | Brochures | Mechanical | Careers | Newsletter Sign-up | Contact Us |
| Press Releases - New Absopulse Designs | |||
 
Redundant DC/DC Converter System with 500W Plug-in Modules for Heavy Duty Environments
Utilities, Industrial, Air-traffic Control, Telecom & other critical applications. Absopulse Electronics’ BAP 419 is a redundant DC/DC converter system comprised of up to five, 500W DC/DC plug-in modules in a pre-wired 4U x 19” x 15” shelf. It is based on the same design topology as similar systems that have been operating in power utilities, industrial plants, air-traffic control systems, telecom and other critical applications for over twenty years. Cooled by natural air convection, the BAP 419 system has no fans or other moving parts. This, as well as very large design headroom, ensures high reliability, making the system ideal for maintenance-free operation in remote locations.The BAP 419 plug-in modules each deliver 24Vdc, 48Vdc or 125Vdc and accept an input of 24Vdc, 48Vdc or 125Vdc. Every module is hot-insertable and has a built-in redundancy diode which allows for parallel and N+1 redundant operation. Built-in redundancy also allows for a battery to be connected to the output for back-up purposes. Modules with different outputs can be combined in one shelf to create a multiple-output system. Each 4U x 16HP x 304 mm plug-in module features full electronic protection on the input and output, and output fail alarms which are summarized into a single Form C alarm on the shelf motherboard. An output voltage ‘ON’ LED indicator, voltage adjustment potentiometer and test points are located on the front panel of every module. For detailed specifications, please see datasheet above (right). August 2008 |
Datasheet
Detailed specifications for this design, please download our generic datasheet below  BAP 419 System datasheet
|
||
|
|||
