Railway, Heavy-duty DC-DC Power Converters, DC-AC Inverters & AC-DC Power Supplies
Heavy-duty Power Conversion
Solutions for Railway

ABSOPULSE offers an extensive range of EN50155 compliant switching power supplies for railway environments, all designed and manufactured in-house.

Our railway grade power conversion products include DC-DC converters, AC-DC power supplies, rectifiers and battery chargers, DC-AC sine-wave inverters and modular power systems.

We can meet almost any electrical and mechanical configuration requirements with modified existing designs, semi-custom or fully custom solutions. Output power ranges from a few watts to several kilowatts.

ABSOPULSE railway grade power conversion products are designed for a long operational life in severe environments - our first major railway project was in 1985 and the original units are still in operation.

High quality designs with traditionally large design headroom and the exclusive use of components with established reliability over many years ensure high MTBF and contribute to low life cycle costs of the units.

All heat generating components are cooled by conduction cooled heat-sink blocks for optimum thermal performance. High efficiency, full electronic protection, and surge and transients protection also contribute to product reliability.

Our long-term customers include a few of the biggest names in the international railway industry.

ABSOPULSE railway power supplies operate in on-board and trackside electronic systems in major railway projects around the world.

These projects include light rail, trams, overhead trains, underground and other mass transit systems, freight trains, and mining locomotives, in every conceivable application.

Our Railway grade products offer combinations of the following
  • Any input and output required;
  • Single or multiple outputs;
  • EMI filtering to the required standard, EN55022 Class A or B;
  • Wide operating temperature ranges including -40C to +70C. Wider ranges are available;
  • Wide range of options including output fail alarms, redundancy, indicators, enable/inhibit and other controls;
  • RoHS compliance.

Railway standard compliance

ABSOPULSE railway power supplies are designed to meet rail-specific standards including EN50155, EN61000, EN50121-3-2 conducted and radiated (EMI and EMC), EN55022 Class B, RIA 12, IEC571, as well as IEC61373 shock/vibration and RIA 13 and RIA 20 mechanical standards. Please contact us for compliance to any other standards.

Rugged mechanical designs

ABSOPULSE power supplies are ruggedly constructed and can be customized for specific mechanical requirements. Standard mechanical packages and ruggedization options include:

  • Chassis-mountable units in vented conduction/convection or fan-cooled enclosures;
  • DIN-rail and open-frame format available for many designs;
  • Plug-in (Eurocard) format for modular power systems in 19 inch or 23 inch racks;
  • Conformal coating and ruggedizing are standard;
  • Full encapsulation (potting) in a thermally conductive MIL-grade silicon rubber compound with UL94V-0 flammability rating for immunity to high levels of shock and vibration, humidity, moisture, dust, salt, oil, insects and other contaminants.

What's New

IP66-rated DC-DC Converters with RIA 12 input voltage surge withstand capacity

Built-in surge protection of 3.5VN 20ms, these EN50155 compliant converters also meet ...   Read more

Triple-output Railway EN50155 DC-DC converters offers a wide selection of input/output configurations.

This series of rugged, triple output DC-DC converters are designed for railway, transit and other mobile applications. The three outputs are fully regulated, floating and isolated from each other. ...   Read more

Railway DC-AC Sine Wave Inverters - IP66, Watertight

The 300VA, IP66 inverters are protected from the ingress of water, sand, oil, salt, fog, insects. ...    Read more

Selection of a few typical designs (Data Sheets)                Please click here

Contact Our Technical Team
To request a quotation or to discuss your requirements, please fill in the Contact Us form, e-Mail absopulse@absopulse.com telephone or fax us.
Mechanical Designs
Our power supplies are available in standard & custom mecahnical packages. We will be pleased to recommend an optimal solution for your requirements.
Design, Manufacture, Sales: Absopulse Electronics Ltd.
110 Walgreen Rd. Ottawa, Ontario. K0A 1L0, Canada
Tel: +1-613-836-3511   |   Fax: +1-613-836-7488
eMail: absopulse@absopulse.com   |   www.absopulse.com
Sales: Absopulse Marketing Europe GmbH
P.O Box 1501. CH-8620 Wetzikon, Switzerland
Tel: 41-78-896-5049   |   Fax: 41-44-932-3844
eMail: contact@absopulse.ch   |   www.absopulse.ch